dmesg - Mesa 11.0.2

Return To Mesa 11.0.2 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-999-generic (kernel@tangerine) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201512082100 SMP Wed Dec 9 02:02:23 UTC 2015
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a73a6fff] usable
BIOS-e820: [mem 0x00000000a73a7000-0x00000000a7704fff] reserved
BIOS-e820: [mem 0x00000000a7705000-0x00000000aaa56fff] usable
BIOS-e820: [mem 0x00000000aaa57000-0x00000000aaab6fff] reserved
BIOS-e820: [mem 0x00000000aaab7000-0x00000000ab2d5fff] usable
BIOS-e820: [mem 0x00000000ab2d6000-0x00000000ac413fff] ACPI NVS
BIOS-e820: [mem 0x00000000ac414000-0x00000000acee5fff] reserved
BIOS-e820: [mem 0x00000000acee6000-0x00000000acffdfff] type 20
BIOS-e820: [mem 0x00000000acffe000-0x00000000acffefff] usable
BIOS-e820: [mem 0x00000000ad800000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0xace2fc98  ACPI=0xab71c000  ACPI 2.0=0xab71c000  SMBIOS=0xace2f898 
esrt: Reserving ESRT space from 0x00000000ace2fc98 to 0x00000000ace2fcd0.
SMBIOS 2.8 present.
DMI: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 0080000000 mask 7FE0000000 write-back
  2 base 00A0000000 mask 7FF8000000 write-back
  3 base 00A8000000 mask 7FFC000000 write-back
  4 base 00AC000000 mask 7FFF000000 write-back
  5 base 0100000000 mask 7FC0000000 write-back
  6 base 0140000000 mask 7FF8000000 write-back
  7 base 0148000000 mask 7FFC000000 write-back
  8 base 014C000000 mask 7FFE000000 write-back
  9 base 014E000000 mask 7FFF000000 write-back
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xacfff max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x031f6000, 0x031f6fff] PGTABLE
BRK [0x031f7000, 0x031f7fff] PGTABLE
BRK [0x031f8000, 0x031f8fff] PGTABLE
BRK [0x031f9000, 0x031f9fff] PGTABLE
BRK [0x031fa000, 0x031fafff] PGTABLE
BRK [0x031fb000, 0x031fbfff] PGTABLE
RAMDISK: [mem 0x33fc6000-0x35fdafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000AB71C000 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000AB71C0B0 0000DC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 0x00000000AB7360F8 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 0x00000000AB71C218 019EE0 (v02 _ASUS_ Notebook 01072009 INTL 20120913)
ACPI: FACS 0x00000000AC411F80 000040
ACPI: APIC 0x00000000AB736208 000084 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 0x00000000AB736290 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FIDT 0x00000000AB7362D8 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x00000000AB736378 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x00000000AB736440 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: HPET 0x00000000AB736480 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000AB7364B8 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x00000000AB7367D0 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x00000000AB736818 000194 (v01 Intel  zpodd    00001000 INTL 20120913)
ACPI: ASF! 0x00000000AB7369B0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: SSDT 0x00000000AB736A50 000539 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: SSDT 0x00000000AB736F90 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: TPM2 0x00000000AB737B08 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
ACPI: SSDT 0x00000000AB737B40 000041 (v01 Ssdt   PttSsdt  00001000 INTL 20120913)
ACPI: SSDT 0x00000000AB737B88 003245 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: SSDT 0x00000000AB73ADD0 000394 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
ACPI: PCCT 0x00000000AB73B168 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
ACPI: SSDT 0x00000000AB73B1D8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
ACPI: SSDT 0x00000000AB73BCA0 006B80 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: DMAR 0x00000000AB742820 0000A8 (v01 INTEL  BDW      00000001 INTL 00000001)
ACPI: BGRT 0x00000000AB7428C8 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: MSDM 0x00000000AAAB5E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014effffff]
NODE_DATA(0) allocated [mem 0x14eff8000-0x14effbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000014effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000a73a6fff]
  node   0: [mem 0x00000000a7705000-0x00000000aaa56fff]
  node   0: [mem 0x00000000aaab7000-0x00000000ab2d5fff]
  node   0: [mem 0x00000000acffe000-0x00000000acffefff]
  node   0: [mem 0x0000000100000000-0x000000014effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000014effffff]
On node 0 totalpages: 1023669
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 10877 pages used for memmap
  DMA32 zone: 696089 pages, LIFO batch:31
  Normal zone: 5056 pages used for memmap
  Normal zone: 323584 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] dfl edge lint[0x48])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] high res lint[0x5c])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] dfl res lint[0xf8])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] dfl edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa73a7000-0xa7704fff]
PM: Registered nosave memory: [mem 0xaaa57000-0xaaab6fff]
PM: Registered nosave memory: [mem 0xab2d6000-0xac413fff]
PM: Registered nosave memory: [mem 0xac414000-0xacee5fff]
PM: Registered nosave memory: [mem 0xacee6000-0xacffdfff]
PM: Registered nosave memory: [mem 0xacfff000-0xad7fffff]
PM: Registered nosave memory: [mem 0xad800000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xb0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88014ec00000 s97496 r8192 d29480 u524288
pcpu-alloc: s97496 r8192 d29480 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007650
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3846420K/4094676K available (8195K kernel code, 1262K rwdata, 3944K rodata, 1460K init, 1292K bss, 248256K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 2096.966 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4193.93 BogoMIPS (lpj=8387864)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 10 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff820aa000 - ffffffff820b1000)
ftrace: allocating 31476 entries in 123 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000ace3f000 end: 0x000000ace4dfff
DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (16775.72 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xab2d6000-0xac413fff] (18079744 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time:  5:28:26, date: 12/09/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Error parsing PCC subspaces from PCCT
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 9 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801492DC800 0003D3 (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8801497EA000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88014927BC00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb1000000-0xb1ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb221c000-0xb221ffff 64bit]
pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xb2210000-0xb2217fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb2200000-0xb220ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb2224000-0xb222401f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb2218000-0xb221bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x50b0-0x50b7]
pci 0000:00:1f.2: reg 0x14: [io  0x50a0-0x50a3]
pci 0000:00:1f.2: reg 0x18: [io  0x5090-0x5097]
pci 0000:00:1f.2: reg 0x1c: [io  0x5080-0x5083]
pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb2222000-0xb22227ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb2221000-0xb22210ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xb2220000-0xb2220fff 64bit]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0x4000-0x40ff]
pci 0000:02:00.0: reg 0x18: [mem 0xb2104000-0xb2104fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xb2100000-0xb2103fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xb2100000-0xb21fffff]
pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xb2000000-0xb2003fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xb2000000-0xb20fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa73a7000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xaaa57000-0xabffffff]
e820: reserve RAM buffer [mem 0xab2d6000-0xabffffff]
e820: reserve RAM buffer [mem 0xacfff000-0xafffffff]
e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0240-0x0259] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:02: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
system 00:03: [io  0x0680-0x069f] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0xffff] has been reserved
system 00:03: [io  0x1800-0x18fe] could not be reserved
system 00:03: [io  0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io  0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xb0010000-0xb001ffff] has been reserved
system 00:06: [mem 0xb0000000-0xb000ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.2:   bridge window [mem 0xb2100000-0xb21fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.3:   bridge window [mem 0xb2000000-0xb20fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xb0000000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xb2100000-0xb21fffff]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb20fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32852K (ffff880033fc6000 - ffff880035fdb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa24f8000-0xa64f8000] (64MB) mapped at [ffff8800a24f8000-ffff8800a64f7fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1449638906.768:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x1f
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x1f
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x1f
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x1f
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 440c6e414b288adf6b084197ed8be246978c6318'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 11:167:466
 cache: hash matches
 cache: hash matches
 cache: hash matches
 cache: hash matches
rtc_cmos 00:04: setting system clock to 2015-12-09 05:28:27 UTC (1449638907)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81f3d000 - ffffffff820aa000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2032K (ffff880002804000 - ffff880002a00000)
Freeing unused kernel memory: 152K (ffff880002dda000 - ffff880002e00000)
random: systemd-udevd urandom read with 7 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:1f.2: version 3.0
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000678000, f8:32:e4:29:4d:96, XID 10900800 IRQ 47
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xb2222000 port 0xb2222100 irq 46
ata2: SATA max UDMA/133 abar m2048@0xb2222000 port 0xb2222180 irq 46
ata3: DUMMY
ata4: DUMMY
r8169 0000:02:00.0 enp2s0: renamed from eth0
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
usb 1-1: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: HGST HTS545050A7E680, GR2OA3B0, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 A3B0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8HC    1.00 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=148f, idProduct=5372
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 802.11 n WLAN
usb 1-1: Manufacturer: Ralink
usb 1-5: new high-speed USB device number 3 using xhci_hcd
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f00)
psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
psmouse serio4: elantech: Elan sample query result 00, 23, 64
usb 1-5: New USB device found, idVendor=0bda, idProduct=57b5
usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-5: Product: USB Camera
usb 1-5: Manufacturer: 04081-0005360015291028734
usb 1-5: SerialNumber: 200901010001
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
tsc: Refined TSC clocksource calibration: 2096.965 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e39fd93f52, max_idle_ns: 440795250087 ns
usb 1-6: new full-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=13d3, idProduct=3414
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Bluetooth Radio 
usb 1-6: Manufacturer: Realtek 
usb 1-6: SerialNumber: 00e04c000001
usb 1-8: new high-speed USB device number 5 using xhci_hcd
Console: switching to colour frame buffer device 240x67
usb 1-8: New USB device found, idVendor=0bda, idProduct=0129
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: USB2.0-CRW
usb 1-8: Manufacturer: Generic
usb 1-8: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of -360 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
lp: driver loaded but no devices found
systemd[1]: Started Journal Service.
ppdev: user-space parallel port driver
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
systemd-journald[259]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x1
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0xa0077
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
asus_wmi: Number of fans: 1
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3236: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1b
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
usbcore: registered new interface driver btusb
Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000a lmp_ver=06 lmp_subver=8821
Bluetooth: hci0: rtl: loading rtl_bt/rtl8821a_fw.bin
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: hci0: rom_version status=0 version=1
rtl8821ae: Using firmware rtlwifi/rtl8821aefw.bin
rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b5)
input: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
usb 1-1: reset high-speed USB device number 2 using xhci_hcd
ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 1-1:1.0 wlx7cdd9082d5b6: renamed from wlan0
Adding 4092924k swap on /dev/sda7.  Priority:-1 extents:1 across:4092924k FS
audit: type=1400 audit(1449682098.514:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=582 comm="apparmor_parser"
audit: type=1400 audit(1449682098.514:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=582 comm="apparmor_parser"
audit: type=1400 audit(1449682098.578:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1449682098.578:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1449682098.582:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1449682098.582:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
audit: type=1400 audit(1449682098.666:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=600 comm="apparmor_parser"
audit: type=1400 audit(1449682098.722:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=602 comm="apparmor_parser"
audit: type=1400 audit(1449682098.890:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1449682098.994:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=601 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlx7cdd9082d5b6: authenticate with 60:a4:4c:69:bf:d0
wlx7cdd9082d5b6: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlx7cdd9082d5b6: authenticated
wlx7cdd9082d5b6: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlx7cdd9082d5b6: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=24)
wlx7cdd9082d5b6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd9082d5b6: link becomes ready
wlp3s0: authenticate with 60:a4:4c:69:bf:d4
wlp3s0: send auth to 60:a4:4c:69:bf:d4 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 60:a4:4c:69:bf:d4 (try 1/3)
wlp3s0: RX AssocResp from 60:a4:4c:69:bf:d4 (capab=0x11 status=0 aid=5)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /home/kernel/COD/linux/net/mac80211/rate.c:625 ieee80211_get_tx_rates+0x23a/0x5b0 [mac80211]()
Modules linked in: drbg ansi_cprng ctr ccm bnep nls_iso8859_1 rt2800usb rt2x00usb rt2800lib rt2x00lib rtsx_usb_ms crc_ccitt memstick intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc irqbypass videobuf2_memops arc4 videobuf2_v4l2 rtl8821ae videobuf2_core crct10dif_pclmul v4l2_common btcoexist crc32_pclmul rtl_pci videodev rtlwifi media aesni_intel aes_x86_64 mac80211 btusb snd_hda_codec_realtek snd_hda_codec_hdmi lrw asus_nb_wmi cfg80211 asus_wmi btrtl sparse_keymap snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btbcm snd_hwdep btintel bluetooth gf128mul glue_helper snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq ablk_helper snd_seq_device input_leds joydev snd_timer serio_raw cryptd snd soundcore mei_me mei
 spi_pxa2xx_platform processor_thermal_device intel_soc_dts_iosf lpc_ich iosf_mbi snd_soc_sst_acpi i2c_designware_platform dw_dmac i2c_designware_core dw_dmac_core shpchp 8250_dw intel_pch_thermal int3402_thermal tpm_crb int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 rtsx_usb_sdmmc rtsx_usb psmouse i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci r8169 libahci drm mii wmi sdhci_acpi video sdhci fjes
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.0-999-generic #201512082100
Hardware name: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015
 0000000000000000 af253a694fae0639 ffff88014ec03708 ffffffff813c8b04
 0000000000000000 ffff88014ec03740 ffffffff8107d692 ffff8800a98cff30
 ffff8800a98cff00 ffff8800a98cff3c 0000000000000000 ffff88009f581a70
Call Trace:
   [] dump_stack+0x44/0x60
 [] warn_slowpath_common+0x82/0xc0
 [] warn_slowpath_null+0x1a/0x20
 [] ieee80211_get_tx_rates+0x23a/0x5b0 [mac80211]
 [] ? rtl_is_special_data+0x31/0x170 [rtlwifi]
 [] ? rtl_get_rate+0x145/0x200 [rtlwifi]
 [] rate_control_get_rate+0x120/0x150 [mac80211]
 [] ieee80211_tx_h_rate_ctrl+0x1da/0x410 [mac80211]
 [] invoke_tx_handlers+0x2f0/0xef0 [mac80211]
 [] ? enqueue_entity+0x3a2/0xc10
 [] ? cpumask_next_and+0x2f/0x40
 [] ieee80211_tx+0x85/0x110 [mac80211]
 [] ieee80211_xmit+0x9b/0xf0 [mac80211]
 [] __ieee80211_subif_start_xmit+0x55b/0x790 [mac80211]
 [] ? __alloc_pages_nodemask+0x1b1/0xb40
 [] ? ttwu_do_wakeup+0x19/0xc0
 [] ? ttwu_do_activate.constprop.89+0x5d/0x70
 [] ? try_to_wake_up+0x47/0x370
 [] ieee80211_subif_start_xmit+0x10/0x20 [mac80211]
 [] dev_hard_start_xmit+0x24d/0x3a0
 [] sch_direct_xmit+0x12f/0x210
 [] __dev_queue_xmit+0x23d/0x580
 [] dev_queue_xmit+0x10/0x20
 [] neigh_resolve_output+0x118/0x1c0
 [] ip6_finish_output2+0x194/0x4d0
 [] ? pcpu_next_unpop+0x40/0x50
 [] ? pcpu_alloc_area+0x211/0x3d0
 [] ip6_finish_output+0xa6/0x100
 [] ip6_output+0x53/0x110
 [] NF_HOOK_THRESH.constprop.37+0x3f/0xb0
 [] ? icmp6_dst_alloc+0x111/0x160
 [] mld_sendpack+0x154/0x200
 [] mld_ifc_timer_expire+0x18c/0x290
 [] ? igmp6_timer_handler+0x80/0x80
 [] call_timer_fn+0x35/0xf0
 [] ? igmp6_timer_handler+0x80/0x80
 [] run_timer_softirq+0x221/0x2d0
 [] __do_softirq+0xf6/0x250
 [] irq_exit+0xa3/0xb0
 [] smp_apic_timer_interrupt+0x42/0x50
 [] apic_timer_interrupt+0x82/0x90
   [] ? cpuidle_enter_state+0x130/0x270
 [] cpuidle_enter+0x17/0x20
 [] call_cpuidle+0x32/0x60
 [] ? cpuidle_select+0x13/0x20
 [] cpu_startup_entry+0x266/0x320
 [] rest_init+0x7c/0x80
 [] start_kernel+0x481/0x4a2
 [] ? early_idt_handler_array+0x120/0x120
 [] x86_64_start_reservations+0x2a/0x2c
 [] x86_64_start_kernel+0x14a/0x16d
---[ end trace f54031bcfed889c1 ]---
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 1-1: USB disconnect, device number 2
wlx7cdd9082d5b6: deauthenticating from 60:a4:4c:69:bf:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
usb 1-1: new high-speed USB device number 6 using xhci_hcd
usb 1-1: New USB device found, idVendor=148f, idProduct=5372
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 802.11 n WLAN
usb 1-1: Manufacturer: Ralink
usb 1-1: reset high-speed USB device number 6 using xhci_hcd
ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
rt2800usb 1-1:1.0 wlx7cdd9082d5b6: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlx7cdd9082d5b6: link is not ready
wlx7cdd9082d5b6: authenticate with 60:a4:4c:69:bf:d0
wlx7cdd9082d5b6: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlx7cdd9082d5b6: authenticated
wlx7cdd9082d5b6: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlx7cdd9082d5b6: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=24)
wlx7cdd9082d5b6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx7cdd9082d5b6: link becomes ready
wlp3s0: deauthenticating from 60:a4:4c:69:bf:d4 by local choice (Reason: 3=DEAUTH_LEAVING)
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_uncore.c:619 hsw_unclaimed_reg_debug+0x69/0x90 [i915]()
Unclaimed register detected before writing to register 0x23a0
Modules linked in: rfcomm drbg ansi_cprng ctr ccm bnep nls_iso8859_1 rt2800usb rt2x00usb rt2800lib rt2x00lib rtsx_usb_ms crc_ccitt memstick intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc irqbypass videobuf2_memops arc4 videobuf2_v4l2 rtl8821ae videobuf2_core crct10dif_pclmul v4l2_common btcoexist crc32_pclmul rtl_pci videodev rtlwifi media aesni_intel aes_x86_64 mac80211 btusb snd_hda_codec_realtek snd_hda_codec_hdmi lrw asus_nb_wmi cfg80211 asus_wmi btrtl sparse_keymap snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btbcm snd_hwdep btintel bluetooth gf128mul glue_helper snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq ablk_helper snd_seq_device input_leds joydev snd_timer serio_raw cryptd snd soundcore mei_me
 mei spi_pxa2xx_platform processor_thermal_device intel_soc_dts_iosf lpc_ich iosf_mbi snd_soc_sst_acpi i2c_designware_platform dw_dmac i2c_designware_core dw_dmac_core shpchp 8250_dw intel_pch_thermal int3402_thermal tpm_crb int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 rtsx_usb_sdmmc rtsx_usb psmouse i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci r8169 libahci drm mii wmi sdhci_acpi video sdhci fjes
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W       4.4.0-999-generic #201512082100
Hardware name: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015
 0000000000000000 ce9c27f6a169a4a8 ffff88014ec83ce8 ffffffff813c8b04
 ffff88014ec83d30 ffff88014ec83d20 ffffffff8107d692 ffff880146850000
 00000000000023a0 00000000000023a0 ffff880146850080 0000000000000046
Call Trace:
   [] dump_stack+0x44/0x60
 [] warn_slowpath_common+0x82/0xc0
 [] warn_slowpath_fmt+0x5c/0x80
 [] ? wake_up_process+0x15/0x20
 [] hsw_unclaimed_reg_debug+0x69/0x90 [i915]
 [] gen8_write32+0x5a/0x1b0 [i915]
 [] intel_lrc_irq_handler+0x1bc/0x240 [i915]
 [] gen8_gt_irq_handler+0x239/0x240 [i915]
 [] gen8_irq_handler+0xa1/0x730 [i915]
 [] ? hrtimer_get_next_event+0x42/0x70
 [] handle_irq_event_percpu+0x78/0x180
 [] handle_irq_event+0x3e/0x60
 [] handle_edge_irq+0x7d/0x150
 [] handle_irq+0x1a/0x30
 [] do_IRQ+0x4b/0xd0
 [] common_interrupt+0x82/0x82
   [] ? cpuidle_enter_state+0x130/0x270
 [] ? cpuidle_enter_state+0x10b/0x270
 [] cpuidle_enter+0x17/0x20
 [] call_cpuidle+0x32/0x60
 [] ? cpuidle_select+0x13/0x20
 [] cpu_startup_entry+0x266/0x320
 [] start_secondary+0x154/0x190
---[ end trace f54031bcfed889c2 ]---
------------[ cut here ]------------
WARNING: CPU: 3 PID: 32752 at /home/kernel/COD/linux/drivers/gpu/drm/i915/i915_gem_context.c:144 i915_gem_context_free+0x1b5/0x1d0 [i915]()
WARN_ON(!list_empty(&ppgtt->base.active_list))
Modules linked in:
 rfcomm drbg ansi_cprng ctr ccm bnep nls_iso8859_1 rt2800usb rt2x00usb rt2800lib rt2x00lib rtsx_usb_ms crc_ccitt memstick intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc irqbypass videobuf2_memops arc4 videobuf2_v4l2 rtl8821ae videobuf2_core crct10dif_pclmul v4l2_common btcoexist crc32_pclmul rtl_pci videodev rtlwifi media aesni_intel aes_x86_64 mac80211 btusb snd_hda_codec_realtek snd_hda_codec_hdmi lrw asus_nb_wmi cfg80211 asus_wmi btrtl sparse_keymap snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btbcm snd_hwdep btintel bluetooth gf128mul glue_helper snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq ablk_helper snd_seq_device input_leds joydev snd_timer serio_raw cryptd snd soundcore mei_me mei spi_pxa2xx_platform
 processor_thermal_device intel_soc_dts_iosf lpc_ich iosf_mbi snd_soc_sst_acpi i2c_designware_platform dw_dmac i2c_designware_core dw_dmac_core shpchp 8250_dw intel_pch_thermal int3402_thermal tpm_crb int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 rtsx_usb_sdmmc rtsx_usb psmouse i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci r8169 libahci drm mii wmi sdhci_acpi video sdhci fjes
CPU: 3 PID: 32752 Comm: kworker/u8:4 Tainted: G        W       4.4.0-999-generic #201512082100
Hardware name: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015
Workqueue: i915 i915_gem_retire_work_handler [i915]
 0000000000000000 00000000f5c6357e ffff8800352fbc78 ffffffff813c8b04
 ffff8800352fbcc0 ffff8800352fbcb0 ffffffff8107d692 ffff8800a9e7a780
 ffff88008c39e200 ffff88002aba2000 ffff8801468520d8 ffff880146850000
Call Trace:
 [] dump_stack+0x44/0x60
 [] warn_slowpath_common+0x82/0xc0
 [] warn_slowpath_fmt+0x5c/0x80
 [] i915_gem_context_free+0x1b5/0x1d0 [i915]
 [] i915_gem_request_free+0xc3/0xd0 [i915]
 [] intel_execlists_retire_requests+0x177/0x1d0 [i915]
 [] i915_gem_retire_requests+0xd1/0xe0 [i915]
 [] i915_gem_retire_work_handler+0x58/0x70 [i915]
 [] process_one_work+0x1aa/0x440
 [] worker_thread+0x4b/0x4c0
 [] ? process_one_work+0x440/0x440
 [] ? process_one_work+0x440/0x440
 [] kthread+0xd8/0xf0
 [] ? kthread_create_on_node+0x1a0/0x1a0
 [] ret_from_fork+0x3f/0x70
 [] ? kthread_create_on_node+0x1a0/0x1a0
---[ end trace f54031bcfed889c3 ]---
perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10046 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
------------[ cut here ]------------
WARNING: CPU: 3 PID: 3176 at /home/kernel/COD/linux/drivers/gpu/drm/i915/i915_gem_context.c:144 i915_gem_context_free+0x1b5/0x1d0 [i915]()
WARN_ON(!list_empty(&ppgtt->base.active_list))
Modules linked in:
 rfcomm drbg ansi_cprng ctr ccm bnep nls_iso8859_1 rt2800usb rt2x00usb rt2800lib rt2x00lib rtsx_usb_ms crc_ccitt memstick intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel uvcvideo kvm videobuf2_vmalloc irqbypass videobuf2_memops arc4 videobuf2_v4l2 rtl8821ae videobuf2_core crct10dif_pclmul v4l2_common btcoexist crc32_pclmul rtl_pci videodev rtlwifi media aesni_intel aes_x86_64 mac80211 btusb snd_hda_codec_realtek snd_hda_codec_hdmi lrw asus_nb_wmi cfg80211 asus_wmi btrtl sparse_keymap snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btbcm snd_hwdep btintel bluetooth gf128mul glue_helper snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq ablk_helper snd_seq_device input_leds joydev snd_timer serio_raw cryptd snd soundcore mei_me mei spi_pxa2xx_platform
 processor_thermal_device intel_soc_dts_iosf lpc_ich iosf_mbi snd_soc_sst_acpi i2c_designware_platform dw_dmac i2c_designware_core dw_dmac_core shpchp 8250_dw intel_pch_thermal int3402_thermal tpm_crb int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad mac_hid parport_pc ppdev lp parport autofs4 rtsx_usb_sdmmc rtsx_usb psmouse i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci r8169 libahci drm mii wmi sdhci_acpi video sdhci fjes
CPU: 3 PID: 3176 Comm: kworker/u8:3 Tainted: G        W       4.4.0-999-generic #201512082100
Hardware name: ASUSTeK COMPUTER INC. X555LAB/X555LAB, BIOS X555LAB.503 08/04/2015
Workqueue: i915 i915_gem_retire_work_handler [i915]
 0000000000000000 000000004ac5d76e ffff8801470dbc78 ffffffff813c8b04
 ffff8801470dbcc0 ffff8801470dbcb0 ffffffff8107d692 ffff880135866a80
 ffff88008c39e600 ffff88008fd7c000 ffff8801468520d8 ffff880146850000
Call Trace:
 [] dump_stack+0x44/0x60
 [] warn_slowpath_common+0x82/0xc0
 [] warn_slowpath_fmt+0x5c/0x80
 [] i915_gem_context_free+0x1b5/0x1d0 [i915]
 [] i915_gem_request_free+0xc3/0xd0 [i915]
 [] intel_execlists_retire_requests+0x177/0x1d0 [i915]
 [] i915_gem_retire_requests+0xd1/0xe0 [i915]
 [] i915_gem_retire_work_handler+0x58/0x70 [i915]
 [] process_one_work+0x1aa/0x440
 [] worker_thread+0x4b/0x4c0
 [] ? process_one_work+0x440/0x440
 [] ? process_one_work+0x440/0x440
 [] kthread+0xd8/0xf0
 [] ? kthread_create_on_node+0x1a0/0x1a0
 [] ret_from_fork+0x3f/0x70
 [] ? kthread_create_on_node+0x1a0/0x1a0
---[ end trace f54031bcfed889c4 ]---
xhci_hcd 0000:00:14.0: URB transfer length is wrong, xHC issue? req. len = 0, act. len = 4294967288

Return To Mesa 11.0.2 System Information